All aerospace news – Page 404
-
News
FARNBOROUGH: Boeing confirms technical feasibility of '777-10'
Boeing has confirmed that a stretch of the 777-9 is technically possible if customers express interest.
-
NewsFARNBOROUGH: Raytheon Coyote to enter next stage of swarming tests
Raytheon is planning ship-based swarm testing of its Coyote unmanned air vehicle in the coming weeks, under a research programme funded by the US Office of Naval Research (ONR).
-
NewsFARNBOROUGH: Bell eyes German heavylift requirement for V-22
Bell Helicopter is touting its co-developed V-22 tiltrotor for the German air force’s heavylift rotorcraft requirement, despite the programme having largely focused on only two other options to date.
-
News
FARNBOROUGH: AUDS anti-UAV system makes air show debut
Unwanted drones will be in the crosshairs at the Farnborough air show, with the AUDS consortium showcasing its counter-unmanned air vehicle system.
-
News
FARNBOROUGH: South Carolina factory evolving into familiar Boeing facility
A hunk of yellow scaffolding labeled “scrap” in spray paint sat abandoned outside the 787 aft-body assembly building, no doubt waiting for a few of Boeing’s 8,000 workers in North Charleston, South Carolina to haul it away.
-
NewsFARNBOROUGH: Irkut designs global competitor with MC-21, but hurdles remain
Go back in time to March 2008. What if Bombardier never launched the CSeries aircraft family with Pratt & Whitney’s geared turbofan engines? What if Airbus never responded two years later by deciding to re-engine the A320? And what if Boeing wasn’t forced to respond to the A320neo a year ...
-
Opinion
OPINION: Farnborough shows how UK remains aerospace pioneer
The UK may lack an independent aircraft-building industry these days, with the famed constructors of the early jet age long gone or subsumed, but its aerospace industry continues to be a major global player.
-
NewsBoeing selects E170 as next ecoDemonstrator
Boeing has selected the Embraer E170 regional jet to be the next platform in a series of flying testbeds for advanced technologies named ecoDemonstrators.
-
News
FARNBOROUGH: Rotorcraft industry navigates stormy waters
What is beyond doubt is that the rotorcraft industry is having a tough time at present: tightened military spending, mature parapublic markets in the west, and a slumping oil and gas segment – including one of the sector’s big two applying for Chapter 11 bankruptcy protection - have combined to ...
-
News
GA ASI starts assembling first new Predator B variant
General Atomics Aeronautical Systems (GA ASI) has started assembling the fuselage and systems of a new variant of the Predator B unmanned air system (UAS) that is designed to meet existing airworthiness requirements.
-
News
First Bell 525 test aircraft crashes, killing crew
Bell Helicopter has confirmed the first test aircraft in the 525 Relentless programme crashed in central Texas on 6 July, killing two company test pilots and setting back a year-long effort to certificate the first application of fly-by-wire technology in a commercial helicopter.
-
News
FARNBOROUGH: Boeing bids to redeem in-service record with 787-9
Redemption is not a word often associated with the introduction of new aircraft models, but the entry into service of the 787-9 nearly two years ago was anything but a typical event.
-
News
FARNBOROUGH: Lord looks to future with French fly-by-wire acquisition
It has been a year of mixed fortunes in aerospace for Lord. Like most suppliers to commercial airliner manufacturers, the US corporation headed into Farnborough with the “nice problem” of having to ramp up fast to deliver on a large backlog of contracts for Airbus and Boeing aircraft. It has ...
-
News
FARNBOROUGH: Bionic design emerges from Airbus 3D printers
Machining aircraft parts out of giant metal billets is time-consuming, wasteful of material and very expensive – but still, for the most part, necessary. Despite significant advances in the past two decades, autoclave-cured composite parts remain usually more expensive to build than metallic equivalents. Additive manufacturing – so-called 3D printing ...
-
News
SITA OnAir to assist Rolls-Royce engine health monitoring
Rolls-Royce has chosen SITAONAIR technology to collate and distribute engine health monitoring data.
-
News
FARNBOROUGH: Airbus sets stage for A350-2000 launch decision
Only one piece remains missing in the long-term portfolios of Airbus and Boeing widebody products as the two companies enter the Farnborough air show – and it could remain purposefully obscure for at least a while longer.
-
News
AW189 finally receives EASA approval for FIPS
Leonardo’s helicopter division has finally received long-awaited certification for the full icing protection system (FIPS) on its AgustaWestland AW189, allowing the super-medium twin to begin search and rescue operations in the UK.
-
News
FARNBOROUGH: 787 - Rolls-Royce bang on the money with Trent plans
Boeing first flew the 787-8 in December 2009, but the first run of the Rolls-Royce Trent 1000 engine came almost four years before in February 2006. Now more than a decade old, the engine competition between R-R and the GE Aviation GEnx-1B is as intense as ever, with still unpredictable ...
-
News
FARNBOROUGH: Proposed stretch of 737 Max 9 possible, but challenging
The nearly 50-year-old 737 airframe may have one more stretch left to give, but it will not be easy.
-
NewsTwo Mi17V5 helicopters delivered to Serbia
Russian Helicopters delivered two Mil Mi-17V5 rotorcraft to Serbia on 28 June, marking the first delivery of a new rotary type to the country’s air force in 25 years.