All aerospace news – Page 72
-
NewsBoeing confident of overcoming 737 fuselage issue within months
Boeing is confident that it will recover within months from the recent 737 manufacturing process snag affecting aft fuselage sections, having understood the situation and the rework required. Chief executive Dave Calhoun stressed, during a first-quarter briefing, that the company was “working in a very constructive way” with fuselage supplier ...
-
NewsEmbraer ships 15 aircraft in first quarter
Embraer delivered seven commercial aircraft – a pair of E175s and five E195-E2s – and eight business jets, six light and two large, in the first quarter of 2023.
-
NewsBoeing maintains 737 delivery target despite near-term production hitch
Boeing is still expecting to deliver 400 to 450 737 aircraft over the course of this year, and is planning to reach a monthly production rate of 38 aircraft from the current 31. The US airframer reiterated its delivery expectations as it turned in a first-quarter operating loss of $615 ...
-
NewsCFM to roll out Leap durability fixes over next two to three years, says Safran chief
CFM International will over the next two to three years roll out a series of “improvement steps” for the high-pressure turbine blades on Leap engines designed to address premature wear issues seen on examples operated in “harsh environments”.
-
NewsAsia Digital Engineering raises $100 million for new hangar, further expansion
Asia Digital Engineering (ADE) has secured $100 million funding from investment firm OCP Asia, which will go towards the expansion of hangar space in Kuala Lumpur in what it calls “the next phase of growth”.
-
NewsNight vision goggle error likely behind NZ BK117 crash in 2018
The crash of a Kawasaki Heavy Industries BK117-C1 in the Southern Ocean off New Zealand underlines the challenges of operating with night vision goggles (NVGs) over a flat sea.
-
NewsBoeing forms aerospace R&D pact with two South Korean institutes
Boeing has signed agreements with two South Korean institutes aimed at boosting research and development into new technologies.
-
NewsGKN builds additive manufacturing capability as business reaches ‘tipping point’
GKN Aerospace will later this year produce what it describes as the first load-bearing component to be made through additive manufacturing, as the UK-headquartered company eyes a rapid expansion of its capabilities in the space.
-
NewsArrival of EP upgrade for Trent XWB-84 slips to 2025
Service entry for an upgraded variant of the Rolls-Royce Trent XWB-84 engine for the Airbus A350-900 is now not expected until 2025 at the earliest – over five years later than originally planned.
-
NewsGE Aerospace first-quarter profits jump on higher Leap deliveries
GE Aerospace succeeded in ramping engine deliveries in the first quarter of 2023, a period during which it also logged notable gains in revenue and profit.
-
In depthGKN warms to potential of cryogenic fuel cell powertrain as H2GEAR project ramps up
GKN Aerospace has revealed more details of the liquid hydrogen fuel cell propulsion system it is developing, which it says could eventually power a future zero-emission airliner with at least 96 seats.
-
NewsBelavia approved to carry out maintenance on Russian fleets
Russian authorities have approved Belarusian flag-carrier Belavia as a maintenance provider to Russian-registered aircraft. Belavia says the authorisation from federal aviation regulator Rosaviatsia – which followed an audit – “confirms compliance” of its activities with maintenance requirements in Russia. The carrier states that it has a specialised servicing division and ...
-
NewsLeaky lavatory caused Delta 767 flight control problem in 2022
The US National Transportation Safety Board (NTSB) has determined that water leaking from lavatories formed ice that jammed the controls of a Delta Air Lines Boeing 767 last July.
-
NewsHarbour Air delays electric DHC-2 effort amid ‘ever-changing’ certification standards
Canadian regional airline Harbour Air has again delayed plans to begin passenger flights using an all-electric-powered De Havilland Canada DHC-2 Beaver, citing “ever-changing path to certification for an all-electric aircraft”.
-
NewsRaytheon reveals AI-powered target identification sensor
Dubbed “intelligent sensing” technology, Raytheon says its new Raiven system will pair artificial intelligence with electro-optical and infrared imaging to rapidly identify objects from the air in real time.
-
NewsAirbus and P&W to study SAF production and plan to fly A220 with 100% SAF
Airbus and Pratt & Whitney Canada (P&WC) have joined together to study the feasibility of establishing a sustainable aviation fuel (SAF) production site in Quebec, and to fly an A220 powered by 100% SAF.
-
In depthMerger will boost UK aerospace industry: Britten-Norman and CAeS chiefs
Britten-Norman and Cranfield Aerospace Solutions (CAeS) see their upcoming merger as simplifying the route to market for a hydrogen-electric aircraft and offering a boost to British manufacturing thanks to relocation of Islander assembly to the UK.
-
InterviewHow developing markets hooked Jacqui Sutton on a career in aerospace
An ‘atypical’ route into the UK aerospace industry saw Jacqui Sutton working for some of its biggest names. Now non-executive director of the Women in Aviation Charter, she encourages others to follow suit.
-
In depthHow Flight artist John Marsden became a cutaway above the rest
Flight artist John Marsden rose to prominence during the ‘golden years’ of the mid-20th century, and produced unrivalled technical drawings for the title until the late 1990s.
-
NewsCAeS and Britten-Norman build on Fresson partnership with merger plan
UK firms Britten-Norman and Cranfield Aerospace Systems (CAeS) are to merge in an ambitious move to spur the development of a hydrogen-powered zero-emission aircraft.