All Engines news – Page 37
-
News
MTU forecasts uptick this year as 2020 revenue and profit hit by pandemic
German propulsion specialist MTU Aero Engines is cautiously optimistic of a recovery in commercial aerospace this year, as it revealed preliminary results for 2020 that saw both revenue and profit hammered by the effects of the pandemic.
-
News
SAS stays with Leap-1A for remainder of A320neo order
Scandinavian operator SAS has stayed with CFM International for a further batch of engines for its Airbus A320neo-family fleet. SAS has directly ordered 65 A320neos of which 30 have been delivered. It also operates another 15 on lease, including a single A321LR, all of them fitted with the CFM Leap-1A ...
-
News
MC-21’s Russian-built engines pass ICAO emissions test
Source: Rostec PD-14 engines are fitted to the MC-21-310 which commenced flight-tests in December 2020
-
News
Hindustan Aeronautics inks contracts with GE Aviation, R-R
Hindustan Aeronautics (HAL) has signed two multi-year contracts with GE Aviation and Rolls-Royce, which will cover MRO, as well as component manufacturing, in both civil and defence aerospace.
-
News
GKN powers up hydrogen fuel cell development and eyes 2026 service entry
GKN Aerospace has launched the development of a new hydrogen fuel cell powertrain which it believes could enter service in 2026.
-
News
Haste appears pivotal to E-11A crash pilots’ engine misidentification
Military investigators have signalled that haste was a contributing element to a Bombardier E-11A crew’s incorrectly identifying a failed engine and, in response, mistakenly shutting down the functioning one. The E-11A, a US Air Force (USAF) version of the Global 6000 executive jet, crashed some 21nm (39km) short of the ...
-
News
Commercial aerospace recovery will begin in Q2, accelerate through 2021: Raytheon
Raytheon Technologies believes its subsidiaries Pratt & Whitney and Collins Aerospace will begin experiencing notable recovery starting in the second quarter of 2021.
-
News
Fewer engine shipments and less aftermarket work hammer P&W and Collins 2020 results
Steep losses at Pratt & Whitney and slumping profits at Collins Aerospace pushed parent company Raytheon Technologies to a $3.5 billion loss in 2020.
-
News
GE Aviation eyes recovery this year, as 2020 profits plunge by 82%
In 2020, GE Aviation’s engine sales sank 48% and its service revenue tumbled 36%, but the company expects the aerospace sector will begin recovering in the second half of this year.
-
News
Rolls-Royce more pessimistic over long-haul recovery in 2021
Rolls-Royce is assuming engine flying hours on twin-aisle long-haul aircraft will reach just 55% of pre-crisis levels during 2021, down from a previous base case of 70%. The outlook reflects the uncertainty over air traffic recovery for the widebody sector and the engine manufacturer expects, on this basis, free cash ...
-
News
Frontier picks P&W engines for first time to power 134 A320neos
US carrier Frontier Airlines has selected Pratt & Whitney PW1100Gs to power 134 incoming Airbus A320neo-family jets, a move that will diversify its fleet away from complete reliance on CFM International powerplants.
-
News
Spirit AeroSystems and GE Aviation beneficiaries of $125m in US-backed loans
The Export-Import Bank of the United States has agreed to guarantee two financing deals that will provide $125 million to support aerospace work at GE Aviation and Spirit AeroSystems.
-
News
ST Engineering, Honeywell ink agreement for Leap component MRO
ST Engineering and Honeywell Aerospace have signed a 10-year agreement for the maintenance of CFM International’s Leap engine components.
-
News
Yak-40 fitted with propeller for superconducting motor test
Russian researchers are planning to test-fly a Yakovlev Yak-40 modified with a superconducting electric motor and propeller mounted on the trijet’s nose. The Moscow-based Central Institute of Aviation Motors expects the first flights to be carried out in 2021. Siberian aeronautical research centre SibNIA, located in Novosibirsk, installed the electric ...
-
News
EASA embarks on comprehensive project to examine cabin-air toxicity risk
Europe’s air safety authority is initiating a project intended to address concerns about cabin air contamination, which will characterise chemical compounds entering the environmental control system from engine oil leakage or dislodged deposits. The three-year project – being put out to tender by the European Union Aviation Safety Agency – ...
-
News
MC-21 with Russian-built PD-14 engines carries out maiden flight
Irkut has carried out the maiden flight of the MC-21-310, the version of the twinjet powered by Russian-built Aviadvigatel PD-14 engines. The flight – with aircraft number 73055 – took place from Irkutsk aviation plant’s airfield on 15 December and lasted about 1h 25min. It was crewed by two test ...
-
News
MTU becomes second PW1100G MRO shop in China
Pratt & Whitney has opened its second PW1100G geared turbofan MRO centre in China, with MTU Maintenance Zhuhai joining P&W’s global network of MRO providers.
-
News
Volga-Dnepr temporarily withdraws An-124 fleet after Novosibirsk accident
Russian outsize freight carrier Volga-Dnepr Airlines has temporarily withdrawn its Antonov An-124 freighter fleet from service, pending clarification of the circumstances of an accident in Novosibirsk. The operator has about a dozen of the type, including the modernised An-124-100M-150 variant. Volga-Dnepr says it is “doing everything possible” to meet contractual ...
-
News
Embraer solicits partners for potential turboprop but rules out alternative powertrain
Embraer is likely to base any future turboprop airliner on the fuselage of its current E-Jet models and use conventional engines rather than any alternative propulsion system, the head of its commercial aviation unit indicates.
-
Interview
Why despite success, Safran chief Petitcolin is playing down achievements
As his five-year tenure comes to an end, Safran’s outgoing chief executive can reflect on a period of sustained growth for the French aerospace giant – but that is something he is reluctant to take credit for.