All news – Page 1784
-
News
Metal Master begins engine ground runs on Flaris LAR-1 personal jet
Polish engineering company Metal Master has started engine ground runs on the Williams International FJ33-5A-powered Flaris LAR-1 personal jet, and is preparing the five-seat single for its first flight in the third quarter
-
NewsRAF reveals VIP-configured Voyager
The Royal Air Force’s VIP-roled Airbus Defence & Space A330 Voyager has been revealed ahead of its first deployment – transporting the UK defence secretary Michael Fallon to a NATO summit in Warsaw on 8 July.
-
News
FARNBOROUGH: Airbus battles to get A400M back on track
Airbus’s military transport aircraft unit will arrive at the Farnborough air show amid an unwelcome gearbox crisis linked to its poster-child A400M – a model for which adding promised tactical capabilities was already proving harder than expected.
-
NewsPilatus delivers 1,400th PC-12
Pilatus has delivered its 1,400th PC-12, around 22 years after the first example of the single-engined turboprop entered service.
-
News
Hot shutdowns led to CS100 engine-test explosion: inquiry
Canadian investigators have traced an explosion and uncontained engine failure on a Bombardier CS100, during ground tests, to an oil-feed tube seal failure, resulting from misinterpretation of shutdown procedures.
-
News
FARNBOROUGH: Boeing bids to redeem in-service record with 787-9
Redemption is not a word often associated with the introduction of new aircraft models, but the entry into service of the 787-9 nearly two years ago was anything but a typical event.
-
News
FARNBOROUGH: Lord looks to future with French fly-by-wire acquisition
It has been a year of mixed fortunes in aerospace for Lord. Like most suppliers to commercial airliner manufacturers, the US corporation headed into Farnborough with the “nice problem” of having to ramp up fast to deliver on a large backlog of contracts for Airbus and Boeing aircraft. It has ...
-
News
FARNBOROUGH: Bionic design emerges from Airbus 3D printers
Machining aircraft parts out of giant metal billets is time-consuming, wasteful of material and very expensive – but still, for the most part, necessary. Despite significant advances in the past two decades, autoclave-cured composite parts remain usually more expensive to build than metallic equivalents. Additive manufacturing – so-called 3D printing ...
-
NewsNetJets takes delivery of milestone Latitude
Fractional ownership company NetJets has taken delivery of its first Cessna Citation Latitude, and added a further 50 options to its 2012 order for 150 of the midsize business jets.
-
News
FARNBOROUGH: Rolls-Royce ramps up testing on next-generation programmes
The next 18 months are destined to be a busy period for Rolls-Royce’s research and development engineering teams as the UK-based engine manufacturer ramps up test activities on its next generation of turbofan engines.
-
News
Capital Air Ambulance plots European expansion
Capital Air Ambulance, the UK’s largest fixed-wing medical evacuation company, is planning to grow its share of the European market by expanding its fleet and operational bases.
-
News
Ross Aviation relaunches with the acquisition of six FBOs
US fixed-base operator (FBO) chain Ross Aviation has been resurrected by its former owner, two years after the company was snapped-up by business aviation services provider Landmark Aviation for an undisclosed sum.
-
NewsPiper M500 nears European approval, with M600 to follow
Piper Aircraft is confident it will secure long-awaited European Aviation Safety Agency certification for its M500 single-engined turboprop in July, ending a 20-month wait for approval.
-
News
SITA OnAir to assist Rolls-Royce engine health monitoring
Rolls-Royce has chosen SITAONAIR technology to collate and distribute engine health monitoring data.
-
News
FARNBOROUGH: Airbus sets stage for A350-2000 launch decision
Only one piece remains missing in the long-term portfolios of Airbus and Boeing widebody products as the two companies enter the Farnborough air show – and it could remain purposefully obscure for at least a while longer.
-
Interview
INTERVIEW: Air BP in São Paulo prepares to fuel the Olympics
As Brazil enters the run-up to the Olympics, Air BP prepares to support the games through aviation fuelling. Eliana Mendes is Air BP’s operations manager at Guarulhos International airport, the main airport serving São Paulo. She is one of the few women in this role in the country.
-
News
New Delhi issues tri-service MALE UAV requirement
India’s ministry of defence (MOD) has issued a combined tri-service requirement for the acquisition of up to 150, medium altitude long endurance (MALE) UAVs.
-
News
AW189 finally receives EASA approval for FIPS
Leonardo’s helicopter division has finally received long-awaited certification for the full icing protection system (FIPS) on its AgustaWestland AW189, allowing the super-medium twin to begin search and rescue operations in the UK.
-
News
FARNBOROUGH: 787 - Rolls-Royce bang on the money with Trent plans
Boeing first flew the 787-8 in December 2009, but the first run of the Rolls-Royce Trent 1000 engine came almost four years before in February 2006. Now more than a decade old, the engine competition between R-R and the GE Aviation GEnx-1B is as intense as ever, with still unpredictable ...
-
News
FARNBOROUGH: Proposed stretch of 737 Max 9 possible, but challenging
The nearly 50-year-old 737 airframe may have one more stretch left to give, but it will not be easy.