All MRO articles – Page 145
-
NewsFirst A350-1000 structures emerge
Initial carbonfibre wing covers for the first Airbus A350-1000 have been completed, as structural work on the largest member of the family progresses.
-
NewsAirbus tackles 757 range with higher-weight A321neo
Airbus is aiming to introduce a higher-weight version of the A321neo in early 2019, in a bid to reinforce the type’s challenge to the Boeing 757 market.
-
News
ST Aero secures new contracts worth S$450M in Q3
ST Aerospace has secured S$450M (US$354M) in contracts during the third quarter of 2014, down from the S$520M in the second quarter.
-
News
Dragonair contracts CASL for line maintenance
China Aircraft Services Limited (CASL) has signed a contract with Dragonair to begin line maintenance services in Hong Kong from 1 December.
-
NewsMitsubishi lays out plans for MRJ certification campaign
Getting its MRJ regional jet certificated is the biggest challenge Mitsubishi Aircraft expects to have to overcome for its in-development aircraft programme.
-
NewsMitsubishi gets busy with tests in lead up to MRJ first flight
Mitsubishi Aircraft has rolled out its first flight test aircraft for the MRJ regional jet programme and will be conducting a series of tests on the aircraft, leading up to its first flight.
-
News
Air Berlin to maintain MRO footprint despite 737 phase-out
Air Berlin does not intend to cut back its MRO division despite its plans to reduce its fleet and operate a single narrowbody type.
-
AnalysisANALYSIS: MRJ rolls out, but real test lies in certification
When Mitsubishi Aircraft rolled out its first flight test aircraft before a crowd of close to 600 on 18 October, it reached a long-awaited - but largely symbolic - milestone for its MRJ regional jet programme.
-
NewsPICTURE: Mitsubishi Aircraft rolls out first MRJ
Mitsubishi Aircraft has rolled out its first flight test aircraft for the MRJ programme, in time good time ahead of its planned 2Q 2015 first flight.
-
Analysis
ANALYSIS: A330 rate cut shows challenge of bridging to A330neo
While Airbus has been overbooking its A320 line, ahead of starting its transition to the A320neo next year, it does not have the same flexibility to ease the path to A330neo production.
-
NewsA350 secures ETOPS capability up to 370min
Airbus’s A350-900 will initially be approved for extended operations up to 370min.
-
NewsFirst Qatar A350 carries out maiden flight
Qatar Airways’ first Airbus A350-900 has taken off from Toulouse, marking the maiden flight of a serial production A350 airframe.
-
NewsQatar narrows A350-900 delivery window
Qatar Airways is preparing to take delivery of the first Airbus A350-900 from 8-10 December, says chief executive Akbar Al Baker.
-
NewsPICTURE: Rolls-Royce test-flies composite blade
Rolls-Royce has flown, for the first time, the composite blades to be used in its future UltraFan and Advance engine programmes.
-
NewsFirst Qatar A350 prepares for maiden flight
Qatar Airways’ first Airbus A350 could make its maiden flight as early as today, following certification of the type at the end of September.
-
NewsSikorsky, Boeing finalise design of SB-1 Defiant
Sikorsky and Boeing have finalised the design of the team’s offering for the US Army’s joint multi-role technology demonstrator (JMR-TD), called the SB-1 Defiant.
-
NewsLockheed brings Infirno to surveillance market
Lockheed Martin has decided to enter the turreted surveillance payload market, unveiling the 15in (38.1cm)-diameter Infirno system for forward looking infrared and electro-optical imaging.
-
News
Boeing starts building parts for first 737 Max
Having delivered 8,224 737s of all variants from 1967 through September, Boeing’s workers are now starting to build the single-aisle's newest model launched in 2011 – the 737 Max.
-
NewsComac to take delivery of first C919 nose
The nose section for the first C919 prototype is expected to be delivered to Comac's final assembly centre on 15 October.
-
News
Airbus confirms intent to complete A330s in Tianjin
Airbus has confirmed tentative plans to establish an A330 completion centre in Tianjin, where the airframer already has an A320 final assembly line.