Programmes – Page 38
-
NewsJet Aviation delivers first VVIP-configured 737 Max
Completion specialist Jet Aviation has delivered a Boeing 737 Max 8 business jet to a customer, outfitted with a VVIP cabin interior. The customer has not been disclosed but an illustration provided by the company shows a Max 8 with the Cayman Islands registration VP-CMA. Jet Aviation says the design ...
-
NewsHydraulics and locks scrutinised after 757 freight door opens during climb
German investigators are exploring two scenarios after a DHL Air Boeing 757-200 converted freighter’s main cargo door opened in flight, some 3min after take-off from Leipzig. Three occupants – the captain, first officer and a non-company jump-seat pilot – were on board the UK-registered aircraft (G-DHKZ) which was bound for ...
-
NewsAirbus looks to take monthly A320neo output to 64 within two years
Airbus has outlined an aggressive recovery course for single-aisle family production, advising suppliers to prepare for an upward trajectory to reach a monthly rate of 64 A320neo-family aircraft within two years. It has set the “firm rate” target for the second quarter of 2023, after confirming that it will raise ...
-
NewsA330neo secures pioneering EASA carbon dioxide emission certification
Airbus’s A330-900 has been certified for carbon dioxide emissions, the first time the European Union Aviation Safety Agency has applied such a process to an aircraft approval. The airframer voluntarily submitted the A330-900 – powered by Rolls-Royce Trent 7000 engines – to the certification after ICAO finalised a carbon dioxide ...
-
NewsLessor SMBC Aviation Capital orders 14 737 Max 8s
SMBC Aviation Capital has ordered 14 Boeing 737 Max 8 aircraft, becoming the latest lessor in recent months to place additional orders for the narrowbody.
-
NewsAntonov completes fuselage of initial Ukrainian military An-178
Antonov has completed construction of the first An-178 fuselage for the Ukrainian ministry of defence, one of three aircraft destined for the military. The fuselage of the -100P variant was unveiled at a ceremony attended by senior government officials, including the country’s armed forces chief, as well as representatives of ...
-
NewsTail-end of original A320-family line nears with Delta deliveries
Airbus is approaching completion of the full transition to A320neo-family production, with fewer than 40 original A320-family aircraft left undelivered – most of which are likely to remain so. The backlog of the older-generation aircraft comprises 18 A321s and 18 A320s, plus three A319s, with Delta Air Lines the primary ...
-
NewsFirst Il-76 built on automated line transferred for flight-testing
United Aircraft has transferred for ground- and flight-testing the first Ilyushin Il-76 to be manufactured on the advanced assembly line established at its Aviastar facility. The Il-76MD-90A four-engined heavy transport has been formally sent to the flight-test station at Ulyanovsk. United Aircraft revealed last year that a new digital automated ...
-
NewsUnited Engine nears ignition test of prototype PD-8 for Superjet
Russia’s United Engine is preparing to start testing the first prototype core of the Aviadvigatel PD-8 powerplant intended for the Sukhoi Superjet 100. Assembly of the core has been completed and the bench tests are aimed at verifying that the main performance parameters of the engine are in line with ...
-
NewsBulgaria’s Cargo Air takes Europe's first AEI 737-800 freighter
Bulgarian operator Cargo Air has become the first European carrier to take delivery of a converted Boeing 737-800 freighter from US specialist Aeronautical Engineers. Aeronautical Engineers secured certification of the 737-800SF modification from the European Union Aviation Safety Agency on 7 May. It has subsequently delivered the initial European aircraft ...
-
NewsIrkut receives first wing panels for serial MC-21
Russian airframer Irkut has received the first MC-21 wing panels for a serial production aircraft, delivered to the Irkutsk-based facility by road. The 17.5m panel was manufactured at the AeroKompozit plant in Ulyanovsk – a distance of some 3,600km from the MC-21 final assembly line. Irkut will used the panels ...
-
NewsRolls-Royce in talks with Boeing about new-aircraft development
Rolls-Royce is in talks with Boeing about powering a future commercial aircraft, following the UK manufacturer’s 2019 withdrawal from the race to provide an engine for the US airframer’s then-proposed New Mid-market Airplane.
-
NewsAirbus appears to deliver A321neo test aircraft to VietJet
Airbus appears to have delivered the first A321neo manufactured, the MSN6673 test aircraft, to Asian carrier VietJet Air. The twinjet – powered by Pratt & Whitney PW1100G engines – was the first A321neo for which Airbus completed initial assembly. But it was beaten to the variant’s maiden flight in February ...
-
NewsAirbus procurement chief assigned to lead A220 towards profitability
Airbus systems procurement chief Benoit Schultz is to take over as head of the A220 operation, as chief executive of Airbus Canada, succeeding Philippe Balducchi who has led the division for nearly three years. Balducchi has “decided to pursue other opportunities” outside of Airbus, says the airframer, having spent two ...
-
NewsATR ready to start STOL version’s production under new schedule
Turboprop manufacturer ATR has completed the design phase and is preparing to begin production of the short take-off and landing (STOL) version of the ATR 42-600 under a revised schedule.
-
NewsNext-gen fuel for regional operators ‘will take time’: ATR
Turboprop manufacturer ATR has highlighted the difficulty of establishing a supply infrastructure for next-generation aviation fuels in remote areas that are served by regional aircraft.
-
NewsConfident Airbus restarts work on new Toulouse A321neo production line
Airbus has given a further sign of its confidence in single-aisle recovery, by resuming work on an additional assembly line for A321neo twinjets. The airframer had unveiled plans for the modernised Toulouse line in January 2020, just weeks before the pandemic crisis forced it to slash production rates and shelve ...
-
NewsEASA draws up criteria for single-pane observation window modification
European authorities have put forward safety proposals after receiving an application for a large aircraft modification which involves installing two observation windows in the upper aft fuselage. The windows need to be “optical quality”, says the European Union Aviation Safety Agency, which means they will comprise only a single glass ...
-
NewsRolls-Royce UltraFan receives first intermediate compressor case
Rolls-Royce has taken delivery of the first UltraFan engine demonstrator’s intermediate compressor case. The structure has been produced by GKN Aerospace at its Swedish facility. UltraFan is a high-bypass engine being developed by Rolls-Royce for large civil aircraft applications from the middle of this decade, and is intended to improve ...
-
NewsMHI aerospace business narrows full-year losses
Mitsubishi Heavy Industries’ aircraft, defence and space unit narrowed its full-year losses, though the group’s SpaceJet regional aircraft programme will remain frozen in the near term.