All MRO articles
-
NewsUtair Aviation to absorb foreign-aircraft maintenance division TS Technik
Russian operator Utair’s management is to bring its specialised maintenance arm for foreign-built aircraft, TS Technik, directly under its aviation division through a merger of the companies. The decision follows a shareholder vote on 10 December which was overwhelmingly in favour of the proposal. Under the merger plan the company ...
-
NewsSaudia and Air France-KLM to explore 787 engine MRO venture under co-operation pact
Middle Eastern carrier Saudia is entering a maintenance partnership with Air France-KLM which will focus on engine work. The two sides will explore a joint venture for GE Aerospace GEnx engines which power Boeing 787s. Under the pact Saudia envisions awarding at least 50% of GE Aerospace GE90 work to ...
-
NewsRudder-jam ATR 72 freighter not fitted with corrosion-resistant bearings
UK investigators probing a rudder jam involving a West Atlantic ATR 72-200 freighter have found that degraded steel bearings had not been replaced by corrosion-resistant ones. The replacement had been recommended in a service bulleting published 30 years before the incident at Belfast International on 7 March 2023. As the ...
-
NewsSR Technics wins Air India’s CFM56 MRO business
SR Technics has entered an agreement with Air India to provide MRO support for the carrier’s CFM56 engines.
-
NewsBritish Airways expands Cardiff MRO base to handle A350s
British Airways is to expand its Cardiff maintenance station in Wales in order to handle Airbus A350 twinjets. The base is currently able to service only Boeing 777s and 787s. British Airways started introducing A350-1000s in mid-2019. It operates 18 of the type. The carrier states that it will expand ...
-
NewsAir NZ, P&W to expand PW1100G MRO capacity at Christchurch
Air New Zealand and Pratt & Whitney have broken ground on an extension to their joint Christchurch Engine Centre, with an aim to boost MRO capacity for PW1100G engines.
-
NewsSIA Engineering buoyant about MRO demand, but supply chain crunch lingers
SIA Engineering (SIAEC) remains optimistic about “healthy” air travel demand in the near-term, as it sees opportunities in ongoing aircraft delivery delays.
-
NewsHAECO looks to grow Comac MRO capabilities
HAECO and Comac have signed a memorandum of understanding to expand airframe, engine and component MRO services.
-
NewsThree more stored A380s to be broken up for spares
Three Airbus A380s are to be dismantled and recycled in order to feed demand for spares from remaining operators of the double-deck type. Break-up of the jets is the subject of an agreement between Tarmac Aerosave and the German asset management firm EastMerchant Capital. Tarmac Aerosave says they will bring ...
-
NewsMHIAEL sees progress with PW1100G overhauls
Mitsubishi Heavy Industries Aero Engines (MHIAEL) has seen good progress with its new overhaul capability for the Pratt & Whitney PW1100G turbofan.
-
NewsEtihad Airways acquires batch of widebody engines from engineering partner
Middle Eastern carrier Etihad Airways is acquiring 16 engines, almost entirely for widebody aircraft, from the Sanad engineering division of Abu Dhabi sovereign investor Mubadala.
-
NewsRussian government plans system to approve domestically-made parts for foreign aircraft
Russia’s government intends to create a single certification system for components that would enable approved spares for foreign aircraft to be produced by domestic companies.
-
NewsFirst Global A380 awaits heavy maintenance after ferry to EFW facility
Portuguese wet-lease operator Hi Fly’s ferry of the first Global Airlines Airbus A380 to Germany, like its transatlantic flight to Scotland, was carried out with its undercarriage deployed. Hi Fly vice-chair Carlos Mirpuri, who led the flight, states that the aircraft flew 789nm (1,461km) from Glasgow Prestwick to Dresden where ...
-
In depthTurboprop MRO firm APS eyes Asia opportunity with upcoming Malaysia facility
MRO provider Aircraft Propeller Service (APS) will be opening a new facility in Malaysia – its first in Asia-Pacific – as it eyes “important growth opportunities” in the region.
-
NewsAsia Digital Engineering eyes MRO capacity boost as 14-bay hangar opens
Asia Digital Engineering (ADE) is considering plans to build another hangar facility in addition to its newly-opened 14-line MRO facility in Kuala Lumpur, amid a bullish forecast on maintenance demand.
-
NewsEmbraer appoints SIAEC as E2 MRO service centre
SIA Engineering’s Philippines unit will become Embraer’s first authorised service centre in the Asia-Pacific region for the airframer’s E2 aircraft family.
-
NewsUK start-up Global Airlines taps EFW for first A380 MRO works
Prospective UK long-haul start-up Global Airlines has picked German modification specialist EFW for heavy maintenance service of its first Airbus A380, ahead of the airline’s launch.
-
NewsServices market to almost double to $290bn by 2043: Airbus
Airbus Global Services expects the global commercial services market will almost double to $290 billion per year in 2043 from its current level of $150 billion.
-
NewsAsia Digital Engineering, GMF AeroAsia to jointly grow landing gear MRO business
Asia Digital Engineering has signed an investment agreement with Indonesia’s GMF AeroAsia, as the two parties collaborate on landing gear MRO services.
-
NewsThai Airways, Thai Aviation Industries to explore MRO joint business
Thai Airways International has signed a memorandum of understanding with aerospace firm Thai Aviation Industries (TAI) to explore opportunities in commercial aircraft MRO.